Don
Self Hosted Toolchain: The MC HCK as SWD Adapter
I am happy to announce that we have a self-hosted toolchain: The MC HCK can now act as SWD debug adapter for other MC HCKs, without requiring any other external debug adapters or development boards.
The SWD interface is a debug interface, similar to JTAG; however, it only requires two signal lines, and it is specific to ARM processors. In the MC HCK toolchain, we use SWD to initially program the USB bootloader, as well as to debug code. See below for a short example session.
With this, the MC HCK project has reached an important step on the way towards creating an entirely free (FLOSS) and inexpensive modern microcontroller platform.
Bootstrapping yourself
Of course, if you are starting from zero, with only blank, self-built MC HCKs, you will face a chicken-and-egg problem: how to program the first MC HCK? Head over to the wiki, which explains how to get started using other SWD programmer options, such as the Bus Pirate or the Bus Blaster. And thanks to our portable SWD bitbang code, other development boards will also be able to bootstrap the MC HCK toolchain, starting (very soon!) with an Arduino sketch.
Even though the MC HCK SWD adapter could be used to connect to other microcontrollers as well, there is no specific code support yet. But our open source friends have you covered: check out Versaloon or the great Black Magic Probe, which directly presents as GDB target and whose source helped a lot in developing the MC HCK SWD toolchain.
Debugging a MC HCK
Read More...
https://mchck.org/blog/2013-08-13-self_hosted_toolchain_the_mc_hck_as_swd_adapter/
MC Hack ARM based Self Hosted Toolchain The MC HCK as SWD Adapter
- Update: McHck’s self flashing rig
- Self hosted toolchain: The MC HCK as SWD adapter - mchck.org
- MC HCK flashing rig - mchck.org
- Ragel State Machine Compiler
- mchck/mchck · GitHub
- A $5 ARM development board
- Versaloon Platform
- Black Magic Probe
0 comments:
Post a Comment